Position: Home > Products >


Price:39.99 Sale:39.99 Brand:Quimat Model Number:EM001
Click to buy:

Quimat EM001 oscilloscope kit is an assembled finished machine which can be used directly.

Unlike DIY oscilloscope kit, you don’t need to do assembly or soldering work before using, which will avoid some problem caused on soldering or assembling process and save your time.

Great Replacement
✔ Extended both in width and height
✔ Hand-held
✔ Added the rotary encoder, makes parameter adjustment more quicker and easier.
✔ Easily capture instantaneous wave forms using the Auto/Normal/Single Trigger mode.
✔ Display and MCU are mounted on the same board (main board) to avoid using inter-board pin-headers. Analog channel is placed on a separated board which contains most user install parts, so the analog and digital circuits can be better separated.
Number of Channel: 1
Analog Bandwidth: 0 - 200KHz
Sensitivity: 5mV/Div - 20V/Div
Sensitivity error: < 5%
Resolution: 12-bit
Input Impedance: 1M ohm
Maximum Input voltage: 50Vpk
Coupling: DC, AC, GND
Trigger Modes: Auto, Normal, Single
Trigger Types: Rising/falling edge
Trigger Position: 1/2 of buffer size fixed
Display: 2.4 inch color TFT LCD with 320 x 240 resolution
Power Supply: 9V DC (8 - 10V acceptable), NOT INCLUDED
Dimension: 115mm X 75mm X 22mm
Weight: 100 gram (not including cables and power supply)
Packing Lists
1 * Oscilloscope  
1 * BNC-clip cable
1 * Users Manual
Kindly Note
1. It runs on 9V power adapter. The power supply voltage must not exceed 10V. Otherwise it is possible to burn out the machine. 9v dc power supply should be center positive.
2. The kit does not contain a power adapter, it is quite easy to get one. Please prepare yourself.
Column List