Position: Home > Products > Products >

QD06

Price:26.99 Sale:26.99 Brand:QUIMAT Model Number:QD06C-UK
Click to buy:
Description
  
ASIN: B06XRBSBMV
SKU:QD06C-UK
 
 
Quimat Arduino CNC Kit with Stepping Motor,CNC Shield V3.0 + UNO R3 + 4 PCS A4988 Driver + Nema 17 Stepping Motor for 3D Printer CNC,GRBL Compatible
 
 
CNC Shield V3.0 Features - Latest Version 3.0, GRBL 0.8c compatible, 4 Axis supported and 2 end stops for each axis.
Compact design - Stepper motors can be connected with 4 pin molex connectors or soldered in place.
Stepper Drivers - Uses removable Pololu A4988 compatible stepper drivers to set the Micro-Stepping for the stepper drivers.
Stepping Motor Included - Nema 17 model, holding torque of 26Ncm, 12V/0.4A and 1.8 deg.step angle(200 steps/rev)
Technical support - Our technical support team is on standby to provide solutions to your questions, please feel free to contact us.
 
CNC Shield V3.0 features:
Latest Arduino CNC Shield Version 3.0.
GRBL 0.8c compatible.(Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
4-Axis support(X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis(6 in total), Spindle enable and direction Coolant enable
 
Stepper drivers
Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
 
Compact design.
Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
 
Stepping Motor
The most popular Nema 17 model with 1.8 deg. step angle (200 steps/revolution)
0.4A rated current/phase, allowing for a holding torque of 26Ncm
Connection:Black(A+), Green(A-), Red(B+), Blue(B-)
 
Stepping Motor Specification:
* Cable length: 11.8 inches
* Phase Resistance: 30ohms
* Inductance: 37mH+/-20%(1KHz)
* Frame Size: 42 x 42mm
* Body Length: 34mm
* Shaft Diameter: 5mm
* Front Shaft Length: 20mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 300mm
* Weight: 230g
 
Kit list:
1x CNC Shield V3.0
1x Keyestudio UNO R3 board
4x A4988 driver
1x USB cable
1x Nema 17 stepping motor
 
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

------分隔线----------------------------
Column List
Recommend
Hot